Stronghold Coiled Tether Cord with Carabiners

Coiled Tether Cord with Carabiners

Quick Installation:
1. Connect the tether to an approved tethering point e.g. D-ring on a safety harness. [Note: When using the tool, use the non-swivel end for installation]
2. Connect the swivel end of the coiled tether cord to an attachment point on a tool that is less than the weight rating (i.e 2.27kg)
3. Make sure to close the screw gate fully

Features

• 360° heavy-duty swivel to prevent entanglement and increase the longevity of the tether
• Each tether has a protected label identifying rating, instructions, date of mfg and traceability
• EZ Clean Material

Specifications

• Standard: ANSI/ISEA 121-2018
• Maximum Tool Weight: 2.27kg
• Max Tether Length: 122cm
• Retracted Length: 76mm

Important Notes:

• Remove and replace the tool if:
  - there is any evidence of wear such as cracks and slits
  - the tool experiences a drop
  - the carabiners do not close properly
  - the welded rings or key rings are bent
  - there is any doubt of product integrity
  
• Never attach the coiled Tether Cord to a trouser loop
• Do not use this product on or near rotating equipment