ExcellentJudge.me reviewsBig bulk discountsUp to 25% off*
KlarnaFinancing available
Free deliveryOrders over £100*

Wesco

We sell the full Wesco range of pump-action oil cans, from 350cc to 1000cc capacity, with flexible or rigid nylon spouts for precise, controlled oiling in workshops, garages and on site.

Each oiler uses a simple pump plunger to push oil through the spout in a controlled stream, rather than pouring freely from an open can, making it easier to target bearings, hinges, chains and gears without wasting oil or making a mess.

Wesco– Now available at MTN Shop UK.

What is a Wesco oiler used for?

A Wesco oiler is a pump-action oil can used to apply small, controlled amounts of lubricant to bearings, hinges, chains, gears and other moving parts. Pressing the pump plunger forces oil through the spout in a targeted stream, which makes it easier to reach tight or awkward spaces than pouring from a bulk container.

Choosing the right capacity

Wesco oilers in this range run from 350cc up to 1000cc. Smaller 350cc cans suit light, occasional lubrication tasks and are easier to store in a toolbox, while the 500cc and 1000cc models hold enough oil for repeated top-ups across a full workshop session without refilling. Capacity should match how often the tool is used, not just the size of the job.

Flexible spout vs nylon spout

The flexible braided spout bends to direct oil around obstructions and into recessed fittings, making it the better choice for awkward angles on machinery or vehicles. The rigid nylon spout gives more precise, controlled placement on a fixed target, such as a single visible bearing or hinge point, where a bendable spout isn't needed. Several models in the range also take a spare replacement spout, so a worn or damaged spout doesn't mean replacing the whole oiler.

Where Wesco oilers are used

These oilers are common in workshop maintenance, machine shops, automotive garages and general site tool kits, anywhere small moving parts need regular lubrication to prevent wear. They're a straightforward addition alongside general lubricants, oils and maintenance products for anyone maintaining tools, machinery or vehicles on a regular basis.

Why buy your Wesco oilers from MTN Shop

All Wesco oilers sold here are genuine stock, ready to fill and use straight out of the box. We ship fast across the UK with straightforward returns on unused stock. For bulk orders or fitting out a full workshop, request a quote and our team will confirm stock and lead time directly.

Frequently Asked Questions

For occasional light lubrication tasks, a 350cc oiler is usually enough. For daily workshop use or machinery needing frequent top-ups, a 500cc or 1000cc model reduces how often you need to refill.
A flexible spout bends to reach awkward angles and recessed fittings, while a rigid nylon spout gives more direct, precise placement on a fixed target. Choose flexible for hard to reach parts and nylon for straightforward, visible lubrication points.
Yes, spare flex braid spouts are available separately, so a worn or damaged spout can be replaced without needing to replace the whole oil can.
Wesco oilers are designed for general purpose lubricating oils used in workshop and machine maintenance. Check the oil's viscosity is suitable for pump-action dispensing, since very thick oils may not flow smoothly through the spout.
Leaks usually come from a worn pump seal or an overfilled can. Avoid filling above the recommended level, and check the pump mechanism seats fully after each use to keep pressure sealed inside the can.

You may also like...