Strainers & Turnbuckles

Turnbuckles and barrel strainers from Doughty Engineering for tensioning and adjusting wire rope, safety lines and flying systems. Choose from eye to eye and hook and eye designs, with eye to eye strainers available in M8 (230kg WLL) and M10 (700kg WLL), including tested versions.

Not sure which end fitting you need? See the guide below, or browse the full rigging accessories range.

Doughty Eye to Eye Strainers - Galvanized steel turnbuckle with eye and eye design.
Loading…

3 products

View

Strainers & Turnbuckles – Product list

What Is a Turnbuckle?

A turnbuckle, also called a barrel strainer or rigging screw, is a tensioning device with a threaded end fitting at each side of a central body. Turning the body draws the two ends together or pushes them apart, so the tension in a wire rope or line can be adjusted precisely after it has been installed, without cutting or replacing the rope.


Types of Turnbuckles in This Range

Eye to Eye Turnbuckles

Eye to eye turnbuckles have a closed eye at both ends, giving a secure connection to shackles, thimbles or fixed anchor points. The Doughty Eye to Eye Strainers are available in M8 (230kg WLL) and M10 (700kg WLL), with tested options for applications that require test documentation.

Hook and Eye Turnbuckles

Hook and eye turnbuckles combine an open hook at one end with a closed eye at the other, so one side can be attached or released quickly. See the Doughty Hook and Eye Strainers.

Barrel Strainers

The Doughty Barrel Strainers/Turnbuckles are available in hook and eye or eye and eye configurations, for general tensioning of wire rope and lines.


How to Choose a Turnbuckle

  • End fittings: choose eye to eye for permanent, secure connections and hook and eye where one end needs quick attachment.
  • Working load limit: select a turnbuckle with a WLL above the maximum load on the line, with a safety margin.
  • Thread size: match the size to the rope and fittings it connects to; larger threads generally carry higher loads.
  • Tested versions: choose a tested option where your application or venue requires documented load testing.
  • Inspection: check threads, eyes and hooks for wear, bending or corrosion before each use.

Complete Your Rigging Setup

Pair turnbuckles with wire rope and fittings and shackles and quick links. For stage and event work, see the entertainment and stage rigging guide.

Frequently Asked Questions

Doughty barrel strainers are used to apply and adjust tension in wire rope, safety lines and flying systems in theatre and stage rigging. They allow the rigger to fine-tune the tension of a line after installation without replacing the rope. Doughty barrel strainers are available in hook and eye and eye and eye configurations with WLL ratings up to 700kg.
A Doughty eye to eye strainer has an eye fitting at both ends and connects between two shackles or eye bolts in an inline wire rope system. A Doughty hook and eye strainer has a hook at one end that connects directly to a bar, bracket or structure without a secondary shackle or eye bolt, making it faster to rig in applications where direct hook connection is acceptable.
Doughty eye to eye strainers are available in M8 with a 230kg WLL and M10 with a 700kg WLL. Always verify the maximum tension in the line including the suspended load and any dynamic forces before selecting a strainer. Tested versions are available for both sizes where independent proof testing documentation is required for the installation.