Stronghold D-Ring Webbing
£12.63
Stronghold D-Ring Webbing
£15.16incl. VAT
Incl. VAT. Shipping calculated at checkout.
In stock
klarna.
Add an item to see installment options
Stronghold D-Ring Webbing
This is a 1.2 cm wide heavy duty orange webbing with a D-Ring, designed to work with attachment tape (sold separately) to adapt your tool into a tetherable tool to prevent it from dropping.
The Webbing with D-ring can create an instant attachment point on any hand tool, ideal for your hand tools that do not have preexisting attachment points.
Quick Installation:
1. Wrap the tape around the webbing of an attachment point and your tool
2. Stretch the tape as much as possible while wrapping
3. Ready to be tethered.
Features
- Quick attachment point solution for your non-tetherable tools.
- High strength nylon webbing
- D-ring end
Specifications
-
Maximum Tool Weight:
- 30cm tether: 2.27kg
- 120cm tether: 0.45kg - Pack Size: Pack of 5
-
Tool Diameter/Tape Required:
- 0.64cm: 20.32cm needed before stretch
- 1.27cm: 40.64cm needed before stretch
- 2.54cm: 81.28cm needed before stretch
- 5.08cm: 162.56cm needed before stretch
How to use D-ring webbing to create an instant attachment point on any hand tool?
- Choose a proper tool (wretch, hammer etc) and a suitable point on the tool for a lanyard attachment tape
- e.g. will not obstruct the use of the tool
- e.g. will not create a safety hazard - Cut a length of tape long enough to wrap around the tool at least 8 times (TIP: Use the table above to decide the length)
- Start wrapping near the base of the D-ring webbing and make sure to stretch while wrapping for at least four revolutions with 100% overlap (TIP: stretching can activate the bond)
- Continue wrapping and stretching down the D-ring with a 50% overlap
- When reaching the D-ring (But not pass it), be sure to complete another 4 rotations with 100% overlap
- Be sure to test your sealing tape attachment by firmly pulling on the D-ring
You may also like
