Incl. VAT. Shipping calculated at checkout.
- Rear enclosure panel for The Tent. Closes off the back of the structure for a finished, professional look.
- Reduces max load capacity as wind increases. From 160kg at 0 km/h down to 50kg at 65 km/h, not rated above 65 km/h.
- Backdrop only, structure sold separately. Compatible exclusively with the Konligo The Tent.
- Available in Black, White, Colored, or Printed. Add custom branding to your backdrop.
Konligo The Tent Backdrop
Add a finished rear wall to your Konligo The Tent with the Backdrop accessory. Rather than leaving the back of the structure open, the Backdrop closes it off completely, giving the tent a polished, professional look from every angle and creating a defined surface for photography, signage, or branding at the rear of your setup.
This listing is for the Backdrop only. The Tent structure and membrane are sold separately, available here.
Key Features
- Fully encloses the rear opening of The Tent
- Provides a clean, dedicated surface for photo backdrops, signage, or branded messaging
- Choose from Black, White, Colored, or a fully Printed finish with your own artwork
- Designed exclusively for use with the Konligo The Tent structure
Important Note: Effect on Wind and Load Ratings
Because the Backdrop adds surface area that catches more wind, it lowers the structure's safe working load and raises the ballast needed at each wind speed:
- 0 km/h: load capacity is unaffected, still 160kg total (20kg per hanging point)
- 30 km/h: capacity falls to 110kg total (13kg per point), down from 130kg without the Backdrop fitted
- 45 km/h: capacity falls to 30kg total (4kg per point), down from 65kg without the Backdrop fitted
- 65 km/h: capacity is limited to 50kg total (6kg per point), versus 80kg without the Backdrop, and demands guy lines together with 620kg of ballast (or 250kg of ballast if guy lines are also used)
- Beyond 65 km/h, the structure is not rated for use with the Backdrop attached
Guy lines become mandatory above 45 km/h regardless of load. And once total hanging load exceeds 80kg, or 10kg at any single point, an additional 150kg of ballast is required on top of the standard figures.
Explore the full range of Konligo structures at Konligo at MTN Shop UK.






