✦ Free shipping over £150 ✦ No customs charges ✦ Estimate shipping: £8.8 - £13 ✦ BREXIT-proof shipping: 5-7 days as standard ✦ If your order isn't right ➜Get a return label
Our standard 4-point fall arrest safety harness with a rear ‘dorsal’ and a front ‘sternum’ fall arrest point as well as 2 side work positioning attachment points.
Lightweight, easy to don with five points of adjustment to ensure a better fit. Available with carbon steel, stainless steel or plastic coated pressed steel dielectric fittings, this harness is suitable for fall arrest, work restraint and work positioning.
The PBH04 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.
Certified fall-arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted for fall arrest but is primarily for work positioning. 2 Side “D”s are for work positioning only.
For fall arrest the PBH04 must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN.
When used for fall arrest a predetermined rescue plan must be a part of your safe system of work.
ATTACHMENT POINT - The front and rear “D” ring is safe to connect to any EN compliant fall protection system.
REINFORCED WEBBING - Potential stress points are reinforced to ensure an extra level of safety and durability.
LABEL POUCH - All individual Harness information is kept securely inside the label pouch for easy reference and protection.
TRAPEZOIDAL BUCKLES - Angled buckles ensure that harness webbing follows the contours of the body for a more comfortable and secure fit.
FALL ARREST INDICATOR - Fall arrest indicating tabs allow the user to easily and confidently determine if the harness has been subjected to fall forces.
END STOPS - Webbing ends are finished with a tactile, branded rubber end stop.
CONTRAST STITCHING - Contrast stitching is used for easy inspection, prior to donning.
Recommended minimum anchor strength – 12kN
Rear D fall arrest attachment point (Dorsal)
Front D fall arrest attachment point (Sternum)
Side D work positioning attachment points
Carbon steel, black powder-coated
Dielectric plastic-coated pressed steel
Webbing - Polyester webbing, water repellent & UV resistant